36V Charger 44V 2A XLR Charger for EB-6 Bandit E-Bike 42V Lithium Battery Charger

To prolong the lifespan of your batteries by up to 10 times, it is recommended to avoid using them when their charge level drops below 35% and to refrain from charging them above 85-90% capacity.

The charger's input specifications are as follows: AC 100-240V, 50/60Hz. The charging voltage is 42V, and the charging current is 2A. The charging mode is Constant Current-Constant Voltage (CC-CV).

The charger's indicator lights are as follows: Red light indicates the battery is charging, and a green light indicates the battery is fully charged. The charger port is an XLR Male/Microphone Head connector.

The product dimensions are 132 x 57 x 32 mm, and the cable length is 39.4 inches/100 cm. The charger offers security protection features, including Overvoltage Protection (OVP), Overcurrent Protection (OCP), Overload Protection, and Short-circuit Protection.

The product packaging includes a 42V 2A battery charger and a US plug cable.

To use and maintain the charger properly, follow these guidelines: 1. When charging, connect the battery first, then plug the charger into the AC power source. After the battery is fully charged, disconnect the AC power first, then remove the battery plug. Pulling the battery plug first while charging, especially with a high charging current (indicated by a red light), can easily damage the charger. 2. Avoid completely draining the battery before charging, as this can compromise the battery's protection or even cause damage. 3. Periodically perform a deep discharge (about every 3 months) to activate the long-term dormant materials within the battery. 4. If the battery has not been used for an extended period (2-3 months), charge it before use to ensure it is not damaged. 5. Use the charger in a dry environment. 6. When not in use, do not leave the charger constantly connected to the power source.

Tangspower is committed to providing high-quality products to its end-users. If you are not satisfied with the product, please let us know, and we will offer a full refund or replacement.

The charger's input specifications are 100-240VAC, 50/60Hz, 2A, and the output is 42V, 2A, with a mini 3-prong connector. The connector's pin assignments are: "1" for "+," "2" for "-," and "3" for ground. The plug's diameter is 18mm (0.71 inches), so please check the size before ordering.

The charger features a 105°C output capacitor that is globally suitable for the input voltage. It undergoes a 100% full-load aging test, and the EMI filter ripple is small. The current and voltage tolerance is ±0.1A and ±0.1V, respectively, ensuring accurate performance. The charger is not a virtual mark product.

The charger's design allows for heat dissipation through the housing, and some surface heating during charging is normal but durable. The charger is equipped with short-circuit protection, overcurrent protection, and overvoltage protection. The red light indicates charging, and the green light indicates the battery is fully charged. The charger automatically stops charging when the rechargeable battery is fully charged.

The charger is compatible with most 42V versions and can be used as a replacement or an additional charger for devices such as I750, IZIP I1000, X-560, X-600, X-650, S750, S1000, ST1, MV714, and ES08, which require an XLR plug/connector for 36V batteries. (Note that 36V is the battery voltage, while the charger voltage is 42V.)

product information: